- Ducting, Diffuser and Accessories
- Packaged Outdoor
- Split Systems and Condensers
- Actuator
- Air Compressor Parts, Components and Accessories
- Air Cond Bracket
- Air Conditioner Sensor
- Air Conditioning Control System
- Air Cooled Chiller
- Air Cooler
- Air Filters
- Air Handlers
- Air Handling System
- Air Swing Motor
- Air Swing Motor (Small)
- Air Terminals HVAC
- Air-Cond and Refrigeration Tooling
- Air-Conditioner Unit
- Anti Clog
- Automatic Drain Valve
- Belting
- Brazing Equipment & Accessories
- Carrier Parts
- Chemicals
- Chilled and Induction Beams
- Chiller Components
- Chiller Parts
- Actuators
- Bearings and Bushing
- Compressors
- Contactors
- Electronic Components
- Fans and Fan Blower Parts
- Filters and Filter Parts
- Gaskets
- Miscellaneous Electrical Parts
- Miscellaneous Fasteners and Fittings
- Miscellaneous Valves
- Motors
- O - Rings
- Oil and Fluids
- Preventive Maintenance Kits
- Pump
- Relays
- Relief Valves
- Repair Parts Kits
- Solenoid Valves
- Switches
- Thermal Expansion Valves
- Transducers
- View All
- Cleaning Equipment & Tools
- Cold Room Parts and Accesories
- Commercial Chiller Components
- Component
- Compressor
- Compressor Accessories
- Condensate Drainage Pump
- Condensing Unit
- Cooling Coil
- Cooling Tower Spare Part
- Copper and Fittings
- Copper Piping Leak Test
- Coupling
- Daikin /Acson / York Spare Parts
- Electrical
- Electronic Air Cleaner
- FAN BLADE / FAN PROPELLER
- Fan Coils
- Fan Motor
- Fan Set
- Filter Aircond
- Fire Duct Systems
- FRIDGE & REFRIGERATOR PARTS
- Hardware Items and Tools
- Induction Units
- Innerco Piercing Valve
- Insulation
- Lubricant Oil and Equipment
- Measuring Instrument
- Packaged Indoor
- Panasonic Compressor
- PCB Board
- Pressure Test Equipment and Accessories
- Refrigerant
- Sensors
- Silicone Sealant
- Spray Pump
- Temperature / Humidity Display & Controller
- Underfloor Air Distribution
- Unit Ventilators
- Vacuum Pump
- Valve (Water/Steam Application)
- Water Cooled Chiller
- York Chiller Parts
- Others
- Others
United Faith Sdn Bhd (HQ)
6 (Ground Floor), Jalan BPU 6, Bandar Puchong Utama, 47100 Puchong, Selangor, Malaysia.
+6012-5992610
SG Branch :
United Faith Pte Ltd
7030, Ang Mo Kio Ave 5, #01-23, Northstar@AMK, Singapore 569880.
+65-9106 6813
KL Branch :
8G, Jalan Pandan 2/3, Pandan Jaya, 55100 Kuala Lumpur, Malaysia.
+6012-491 2610
PJ Branch :
13, Jalan 21/37, SS 2, 47300 Petaling Jaya, Selangor, Malaysia.
+6012-599 2610
AquaEdge® High-Efficiency Semi-Hermetic Centrifugal Chiller 19XR
Previous | 7 / 7 | Next |
- Carrier Water Cooled Chiller Malaysia
- Commercial Water Cooled Chiller Malaysia
- Water Cooled Chiller Malaysia
- Carrier High-Efficiency Semi-Hermetic Centrifugal Chiller 19XR Malaysia
- High-Efficiency Semi-Hermetic Centrifugal Chiller 19XR Malaysia
Single-Stage (200 to 1,600 Tons)
--Constant Speed
--Variable-Speed (19XRV)
Two-Stage (600 to 3,400 Tons)
--Constant Speed
--Variable-Speed (19XRV)
The AquaEdge® 19XR/XRV centrifugal chillers achieve energy efficiency levels using proven technology designed specifically for chlorine-free refrigerant. This combination ensures the most cost-effective, reliable solution for today's comfort cooling and process cooling applications.
Carrier's AquaEdge® chillers offer the best value in high-efficiency, chlorine-free centrifugal HVAC chillers.
Water-cooled chillers within the scope of the AHRI WCCL certification program are certified in accordance with the AHRI Water-Cooled Water-Chilling and Heat Pump Water-Heating Packages Certification Program, which is based on AHRI Standard 550/590 (I-P) and AHRI Standard 551/591 (SI). Certified units may be found in the AHRI Directory at www.ahridirectory.org.
Performance Features
- IPLV to 0.31 (19XRV)
- Chlorine-free HFC-134a refrigerant
- Semi-hermetic compressor motor
- Low energy consumption during part load and full load operation
- Aerodynamically contoured impeller
- Multilingual display
- Compatible with Carrier Comfort Network® (CCN) communication link
- Economized two stage compressor 19XR two-stage units)
Reliability Features
- ASME constructed heat exchangers
- Single-stage 200-1600 tons (703 to 5627 kW) or two-stage 600-3400 tons (2110 to 11957 kW) positive pressure design
- Low voltage control circuits
- Lowest industry refrigerant leakage rate at less than 0.1% per year
- Semi-hermetically sealed compressor, motor, and transmission
- Automated controls may be tested before start-up
- Refrigerant-cooled, unit-mounted variable frequency drive (19XRV)
Maintenance Features
- Password protected extensive service menu with built-in diagnostic capabilities, troubleshooting, and corrective action recommendations for preset alarms
- Alarm and alert files maintain the last 25 time and date stamped messages in memory
- Configuration data backup with non-volatile memory
- Thermistor-type temperature sensor with quick connects in each water nozzle
- Refrigerant isolation valves for in-chiller refrigerant storage (factory-installed option)
- Unit-mounted pumpout unit for storing refrigerant inside the chiller during servicing (factory-installed option)
- Service contract available
Installation Features
- Low voltage control circuits
- Refrigerant cooled unit mounted VFD
- Less than 0.1% refrigerant leakage rate per year - lowest in the industry
- Semi-hermetically sealed compressor, motor, and transmission
- Automated controls test on start-up
Factory-Installed Options
-
Enhanced tubing, .028 or .035 in. (0.711 or 0.889 mm):
- Internally/externally enhanced copper tubing - evaporator/condenser
- Internally/externally enhanced cupronickel tubing - condenser
- Smooth bore/externally enhanced copper tubing - evaporator/condenser
- Smooth bore/externally enhanced cupronickel tubing - condenser
-
Titanium condenser tubes, .025 or .028 in. (0.635 or 0.711 mm):
- Internally enhanced tubes
-
Marine waterboxes
- 150 psig (1034 kPa) waterbox
- 300 psig (2068 kPa) waterbox, ASME certified
- Marine bolt-on waterboxes for condenser, 150 psig (1034 kPa) with titanium clad tubesheets (available on condenser frame sizes 2 to 8 and A to D)
- Nozzle-in-head waterbox, 300 psig (2068 kPa)
- Flanged evaporator and/or condenser waterbox nozzles
- Waterbox hinges
- Unit-mounted, low-voltage wye-delta or solid-state starters (Heat exchanger frames 1-7 only)
- One, 2, or 3 pass evaporator or condenser waterside construction
- Zinc anodes
- BACnet® Communications
- Refrigerant isolation valves
- Shipped factory charged with refrigerant
- Unit-mounted pumpout unit
- Hot gas bypass
- Unit-mounted refrigerant-cooled variable frequency drive
- Thermal insulation (except waterbox covers)
- Customer factory performance testing
- Export crating
- Discharge line sound reduction kit
- Seismic Kit
- Extended Warranty (North America only)
- Service Contract
Field-Installed Accessories
- BACnet® Carrier Translator
- LonWorks® Carrier translator
- Sensor package
- Separate storage tank and pumpout unit
- Stand-alone pumpout unit
- Soleplate package
- Spring isolator kit
- Acoustical sound insulation kit
- Freestanding Low Voltage Wye-Delta & Solid Starters
- Freestanding Low Voltage Variable Frequency Drives
- Freestanding Medium Voltage Variable Frequency Drives
Heat Exchanger Size† |
Length with Nozzle-in-Head Waterbox |
Width | Height ** | |||||
---|---|---|---|---|---|---|---|---|
2-Pass* | 1 or 3-Pass | |||||||
ft-in. | mm | ft-in. | mm | ft-in. | mm | ft-in. | mm | |
10 to 12 | 11-4 | 3454 | 11-11 | 3632 | 5-2 7/8 | 1597 | 6-1 1/4 | 1861 |
15 to 17 | 13-7 1/2 | 4153 | 14-2 1/2 | 4331 | 5-2 7/8 | 1597 | 6-1 1/4 | 1861 |
20 to 22 | 11-4 3/4 | 3473 | 11-11 3/4 | 3651 | 5-6 7/8 | 1688 | 6-3 1/4 | 1911 |
30 to 32 | 13-8 1/4 | 4172 | 14-3 1/4 | 4350 | 5-6 7/16 | 1688 | 6-3 1/4 | 1911 |
35 to 37 | 15-4 3/4 | 4693 | 15-11 3/4 | 4870 | 5-6 7/16 | 1688 | 6-3 1/4 | 1911 |
40 to 42 | 14-3 1/8 | 4347 | 14-9 | 4496 | 6-3 1/8 | 1908 | 7-0 3/4 | 2153 |
45 to 47 | 15-8 5/8 | 4867 | 16-5 1/2 | 5017 | 6-3 1/8 | 1908 | 7-0 3/4 | 2153 |
50 to 54, 5K to 5R | 14-4 1/2 | 4382 | 14-10 | 4521 | 6-6 1/2 | 1994 | 7-1 | 2159 |
5A to 5C | 14-4 1/2 | 4382 | 14-10 | 4521 | 6-6 1/2 | 1994 | 7-1 | 2159 |
55 to 59, 5T to 5Z | 16-1 | 4902 | 16-6 1/2 | 5042 | 6-6 1/2 | 1994 | 7-1 | 2159 |
5F to 5H | 16-1 | 4902 | 16-6 1/2 | 5042 | 6-6 1/2 | 1994 | 7-1 | 2159 |
60 to 64, 6K to 6R | 14-5 1/4 | 4401 | 14-11 | 4547 | 6-11 5/8 | 2124 | 7-4 7/8 | 2257 |
65 to 69, 6T to 6Z | 16-1 3/4 | 4921 | 16-7 1/2 | 5067 | 6-11 5/8 | 2124 | 7-4 7/8 | 2257 |
70 to 74, 7K to 7R | 16-6 1/8 | 5032 | 17-0 1/2 | 5194 | 8-1 1/4 | 2470 | 9-9 1/2 | 2985 |
75 to 79, 7T to 7Z | 18-6 1/8 | 5642 | 19-0 1/2 | 5804 | 8-1 1/4 | 2470 | 9-9 1/2 | 2985 |
80 to 84, 8K to 8R | 16-9 1/8 | 5109 | 17-3 1/2 | 5271 | 8-10 3/4 | 2711 | 9-11 1/4 | 3029 |
85 to 89, 8T to 8Z | 18-9 1/8 | 5718 | 19-3 1/2 | 5880 | 8-10 3/4 | 2711 | 9-11 1/4 | 3029 |
*Assumes all customer connections are on the same end of the chiller.
**Height is for chiller without unit-mounted starter.
†Heat exchangers are rated for typical applications at AHRI Conditions (44°F leaving chilled water and 54 F entering in the evaporator, and 85°';F entering condenser water with 94.3 leaving condenser water in the condenser).
19XR Dimensions - Two-Stage Compressor Frame Sizes 6 & 7 (Dished Head Waterbox)
Cooler Heat Exchanger Size | Condenser Heat Exchanger Size | A (Length, Dished Head Waterbox) | 19XR B Width | 19XR C Height | ||||||
---|---|---|---|---|---|---|---|---|---|---|
1-Pass | 2-Pass | 3-Pass | ||||||||
ft-in. | mm | ft-in. | mm | ft-in. | mm | ft-in. | mm | |||
A4* | A4* | 17-8 | 5385 | 17-6.75 | 5353 | 17-6.75 | 5353 | 10-3.13 | 3127 | See Note 6 |
A6* | A6* | 19-8 | 5994 | 19-6.75 | 5962 | 19-6.75 | 5962 | 10-3.13 | 3127 | |
A4* | B4* | 17-8 | 5385 | 17-7.38 | 5369 | 17-7.38 | 5369 | 10-8.5 | 3264 | |
A6* | B6* | 19-8 | 5994 | 19-7.38 | 5978 | 19-7.38 | 5978 | 10-8.5 | 3264 | |
B6* | C6* | 20-0 | 6096 | 19-11.18 | 6074 | 19-9 | 6120 | 12-0.63 | 3674 | |
B8* | C8* | 22-0 | 6096 | 21-1.18 | 6684 | 21-9 | 6629 | 12-5.5 | 3797 | |
C6* | C6* | 20-4.25 | 6204 | 19-11.18 | 6074 | 19-11.75 | 6090 | 12-5.5 | 3797 | |
C6* | D6* | 20-4.25 | 6204 | 20-0 | 6096 | 20-0.5 | 6109 | 13-2 | 4013 | |
C8* | D8* | 20 | 6096 | 21-11.125 | 6684 | 21-9 | 6629 | 13-2 | 4013 |
*Assumes both cooler and condenser nozzles on same end of chiller.
Note 6. 19XR heights can vary depending on the configuration. Check 19XR certified drawings for height information.