United Faith Sdn Bhd (HQ)
6 (Ground Floor), Jalan BPU 6, Bandar Puchong Utama, 47100 Puchong, Selangor, Malaysia.
+6012-2631315
+6012-5992610

SG Branch :
United Faith Pte Ltd

7030, Ang Mo Kio Ave 5, #01-23, Northstar@AMK, Singapore 569880.
+65-9106 6813

KL Branch :
8G, Jalan Pandan 2/3, Pandan Jaya, 55100 Kuala Lumpur, Malaysia.
+6012-491 2610

PJ Branch :
13, Jalan 21/37, SS 2, 47300 Petaling Jaya, Selangor, Malaysia.
+6012-599 2610

Adjustable Power Supply NSA-ADJ-POWER Part Numbers NSA-A:PS24-24V-S

Previous 2 / 2 Next

Adjustable Power Supply NSA-ADJ-POWER Part Numbers NSA-A:PS24-24V-S Carrier Sensor Accessories Air Conditioner Sensor


Part Numbers

NSA-A/PS24-24V-S

The NSA-A/PS24 Series low voltage power supplies accepts a 24 VAC input voltage from a Class 2 transformer and converts it into an adjustable 1.5 to 26 VDC regulated output voltage. The NSA-A/PS24 is able to be configured in either Half or Full Wave mode by using the integral jumper shunt selection switches. An onboard potentiometer is available to allow for field adjustment of the 24 VDC factory set voltage to any voltage from 1.5 to 26 VDC. The standard unit is shipped in a standard snap track mounting configuration to allow for easy mounting inside of your electrical panel or piece of equipment. In applications where a Pilot Duty or remote relay is required, the A/DO008 transorb can be placed across the coil of the relay to snub electrical spikes when the relays are de-energized. An external transorb may not be required if the relay and PS24 power supply is mounted within the same control panel.

Applications

DC Power Supply, Transducer Supply, Test Bench Supply, Analog Signal Simulator, DC Power Regulation from Control Transformer
 

Input Voltage: 22 to 26 VAC, 50/60 Hz (Class 2 Transformer w/ 24 VAC Secondary) or 30 to 36 VDC
VA Requirements: 1.5 VA minimum (No Load); Determine additional VA required by load size
Rectification: Half-Wave (Default) or Full Wave (Jumper Selectable)
Output Voltage: Factory set at 24 VDC; Adjustable from +1.5 to 26 VDC
Output Current: See Ambient Temperature Graph for Output Current vs Ambient Operating Temperature
Overload Protection: Internal Current Limiting Thermal Protection
Ground Loop Protection: Fused, 3.15A/250 VAC, 5 x 20 mm, fast acting (Littelfuse 02173.15 MXP or equivalent)
Status Indication: Red LED Indicates power on status
Operating Temperature Range: 32 to 158ºF (0 to 70ºC)
Operating Humidity Range: 5 to 95%, non-condensing
Storage Temperature Range: 50 to 95ºF (10 to 35ºC)
Storage Humidity Range: 30 to 60%
Connections | Wire Size: Screw Terminal Blocks | 14 (1.31 mm) to 22 AWG (0.129 mm)
Terminal Block Torque Rating: 4 lb-in (0.5 Nm) maximum
Override Option: Short Thermistor (Default); Field (Jumper) Selectable ''Dry Contact'' Closure (Separate Input); Short Set Point available upon request
Operating | Storage Temperature Range: 1.5 to 50ºC (35 to 122ºF)
Operating Humidity Range: 10 to 95% RH, non-condensing
Connections | Wire Size: Screw Terminal Blocks | 16 (1.31 mm2) to 26 (0.129 mm2) AWG
Terminal Block Torque Rating: 0.5 Nm (Minimum); 0.6 Nm (Maximum)
Snap Track Material | Flammability Rating: Polyvinyl Chloride (PVC) | UL94 V-0
Product Dimensions (L x W x H): 3.10'' (78.8 mm) x 2.88'' (73.2 mm) x 2.05'' (52.1 mm)
Product Weight: 0.14 lbs. (0.064 kg)
Agency Approvals: CE, RoHS2, WEEE




Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version
Subscribe Newsletter