United Faith Sdn Bhd (HQ)
6 (Ground Floor), Jalan BPU 6, Bandar Puchong Utama, 47100 Puchong, Selangor, Malaysia.
+6012-2631315
+6012-5992610

SG Branch :
United Faith Pte Ltd

7030, Ang Mo Kio Ave 5, #01-23, Northstar@AMK, Singapore 569880.
+65-9106 6813

KL Branch :
8G, Jalan Pandan 2/3, Pandan Jaya, 55100 Kuala Lumpur, Malaysia.
+6012-491 2610

PJ Branch :
13, Jalan 21/37, SS 2, 47300 Petaling Jaya, Selangor, Malaysia.
+6012-599 2610

BACnet® Modbus Carrier Translator 33CNTRAN485-01-R Product Integrated Controller Controller provides ability to integrate Carrier Comfort Network® (CCN) communicating controllers into BACnet MS:TP and Modbus networks.

Previous 13 / 14 Next

BACnet® Modbus Carrier Translator 33CNTRAN485-01-R Product Integrated Controller Controller provides ability to integrate Carrier Comfort Network® (CCN) communicating controllers into BACnet MS:TP and Modbus networks. Carrier Comfort Network Air Conditioning Control System


Product Integrated Controller

Controller provides ability to integrate Carrier Comfort Network® (CCN) communicating controllers into BACnet MS/TP and Modbus networks.

The BACnet/Modbus Carrier Translator is a micro controller-based module that provides the ability to integrate Carrier CCN-based controllers into Modbus and BACnet networks. The BACnet/Modbus Carrier Translator (33CNTRAN485) provides CCN to Modbus Remote Terminal Unit (RTU) and BACnet Master-Slave/ Token-Passing (MS/TP) protocol conversion.

The Carrier Translator can be mounted in the controls section of any CCN equipment and converts CCNbased controller data to BACnet or Modbus. The Carrier Translator is outdoor duty rated and contains CCN RS-485 and BACnet/Modbus communications connectors.

When connected to a CCN controller, the BACnet/Modbus Carrier Translator allows a third party BACnet or Modbus device to read and write to the CCN controller’s mapped status display, time schedule, and setpoint schedule data. Note that status display write access is subject to the CCN equipment controller’s defined read/write access for each status display item.
 

  • 3-wire removable BACnet/Modbus connector
  • 3-wire fixed screw terminal CCN connector
  • 2-wire fixed screw terminal Power connector
  • Red Processor Status LED
  • Yellow CCN Communication Status LED
  • Green BACnet/Modbus Communication Status LED
Power Requirements 3 VA @ 24 Vac + 25%
Dimensions 2.1 in H x 5 in W x 4 in D
(53.3 mm x 127 mm x 101.6 mm)
Operating Temperature -40°F to 158°F
(-40°C to 70°C)
Storage Temperature -40°F to 185°F
(-40°C to 85°C)
Operating Humidity 0 to 95%, non-condensing
CCN Communications 9600, 19.2K, 38.4K baud
BACnet MS/TP Communications EIA-485
at 9600, 19.2K, 38.4K baud
Modbus RTU Communications EIA-485
at 9600, 19.2K, 38.4K baud
  Data Bits 8
  Parity Odd, Even, None
  Stop Bits 0,1,2
  Flow Control None, XON/XOFF

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version
Subscribe Newsletter